About Energy Savings Through Insulation
Westport, MA reduces energy consumption by keeping a more consistent indoor temperature, thereby decreasing your home’s overall energy usage. It also minimizes air leakage which contributes to high energy bills. Insulation is a crucial element in energy efficiency upgrades. When properly installed, it helps keep warm air inside in the winter and prevents hot air from escaping in the summer, making your heating and cooling systems less taxed and reducing your home’s overall energy usage.

Insulating the attic is one of the most important places to start when it comes to increasing your home’s energy efficiency. This is because it’s one of the most common areas for heat loss, which causes your furnace and AC to work harder. Upgrading your attic insulation can significantly decrease your home’s energy consumption, as well as lowering your utility bills.

Keep Warm Air Inside: How Proper Insulation Works

Other locations where insulating can make a difference include basements, ductwork, and walls. These are areas where drafts can often be felt, as well as being a source of poor air circulation and moisture issues. Loose-fill and spray foam insulation are both excellent options for insulating these areas of the house. Loose-fill insulation involves blowing tiny fibers into wall cavities, while spray foam is applied as a liquid that expands to fill gaps and cracks.

If you’re considering upgrading your home’s insulation, it’s important to consult a professional. Revise offers no-cost home energy assessments, which will provide a detailed evaluation of your home’s current condition and suggest potential improvements that can save you money. Additionally, you can take advantage of Mass Save(r) rebates and incentives to make your upgrade more cost-effective.

AFT Insulation
62 Lighthouse Ln, Westport, MA 02790, United States
(774) 458-9833
…

Spray foam insulation can absorb or emit infrared rays depending on their surroundings. This is why it is important for an inspector to know how to use a thermal camera properly.

Infrared cameras help identify areas of heat loss or moisture intrusion in a home or building. This allows for a faster, more accurate inspection and repair. In addition to revealing air leaks in the walls, ceilings, and attic, it also shows areas of uneven insulation or missing insulation. It can be used in conjunction with a blower door test to exaggerate air leaks and make them easier to find.

Detecting Moisture Intrusion

As with any other non-destructive testing method, the results of IR scanning are not a substitute for the results of direct observation and/or laboratory tests. However, IR can be very useful in detecting conditions that may not be apparent with visual observation alone, such as a plumbing leak or foundation problem. This is because IR can detect a wet area by the Evaporative Cooling effect that water causes. IR images will show wet areas as cooler in color, and should then be verified with a moisture meter to determine the extent of the damage.

Electrical Issues

Normally, current flowing through an electrical system creates heat. When there is an abnormal increase in resistance or a short circuit, the result is often a surge of heat within different electrical components. Using an infrared camera, a qualified inspector can detect this heat and note potential problems before they become full-blown fire hazards or equipment failures.

Georgia Insulation
2092 Crow Rd, Gainesville, GA 30501
(770)758-4459
…

Energy Solutions creates a barrier that prevents heat transfer between your attic and living spaces, stabilizing indoor temperatures year-round and cutting energy bills. It keeps warm air inside in winter and cool air outside in summer, and it helps maintain a consistent temperature from ceiling to floor, particularly important for desert homes with scorching summers and chilly winters.

Your choice of attic insulation depends on a number of factors, including R-value (the measure of how well the material resists heat flow), climate, and your home’s age and size. The Department of Energy recommends an R-30 rating for new construction and an R-49 rating for existing homes.

Fiberglass vs. Spray Foam – Energy Solutions Breaks Down the Best Attic Insulation Types

The most common attic insulation is fiberglass batt or roll insulation, available in a variety of thicknesses and widths. It is easy to install and fairly inexpensive, and it provides good thermal resistance. It is also fire-resistant and doesn’t promote mold growth.

Another option is radiant barrier insulation, which consists of a reflective surface—typically aluminum—attached to a substrate like kraft paper or plastic film. This type of insulation is especially effective in hot climates, because it reduces the amount of incoming sun’s radiant heat, making your home more energy efficient. It is more expensive than other types of insulation, and it requires an air gap between the attic and your living spaces for proper function—which can make attic installation more complicated.

Spray foam insulation, which is applied as a liquid and then expands into a solid form upon curing, offers a superior R-value per inch. It is also an air and moisture barrier, which can help seal leaks and gaps, and it has excellent structural support, but it is more expensive than other insulation options. It must be installed by a trained professional, because it requires special equipment and chemical handling.

Energy Solutions
268 Industrial DR, Clarksville, TN 37040
(931) 651-9284
…

Spray foam insulation reduces air leakage, improving energy efficiency and comfort. It keeps conditioned home air from seeping through ceilings and into uninsulated rooms, making it easier to control indoor temperature and humidity levels. It also helps reduce outside noise, which is particularly important if you live near busy roads, construction or other sources of unwanted noise.

Proper attic insulation is an affordable way to make your home more comfortable and improve its resale value. It will pay for itself in reduced energy costs over time, and it may help you qualify for energy assistance through your state’s Weatherization Assistance Program (WAP).

Professional Attic Insulation Services by Joe Blow’s Insulation

There are several different types of attic insulation, each with its own pros and cons. To choose the best type for your home, you’ll need to consider your climate zone and local building codes, as well as your budget and energy goals. The insulation’s R-value, which indicates its ability to resist heat flow, is also an important consideration.

Fiberglass batt or roll insulation is a popular and budget-friendly option. It is made of fiberglass or mineral wool and comes in blankets that can be affixed to attic joists and trusses. It is easy to install and offers good thermal performance at a lower cost than other options.

Spray foam insulation is a two-part liquid that expands into a foam upon curing, filling gaps and crevices to form a tight seal. It is highly effective, providing a high R-value per inch, and it acts as both an insulator and an air barrier to prevent air leakage. It is available in closed-cell and open-cell varieties. Closed-cell foam provides superior resistance to moisture, while open-cell foam is less durable and can promote mold growth.

Joe Blow’s Insulation
29712 US Hwy 19 N Unit 409 Clearwater, FL 33761
727-454-0172
…

Insulation helps prevent hot air from escaping during winter and cooling conditioned air from seeping through your attic during summer, reducing the workload of your home’s AC system. It also lowers energy bills and improves indoor comfort.

The cost of insulating your attic depends on the type of insulation you choose. You can find quotes across the web for insulation materials, but these can be misleading because they don’t include professional installation or other costs like air sealing and removing old insulation. Getting an accurate estimate will help you determine how much to budget for your project.

Benefits of Spray Foam Attic Insulation in Hot Climates

Synergy Spray Foam & Air Conditioning (fiberglass, cellulose, or natural wool) comes in sheets that can be easily affixed to unfinished attic areas. It’s a popular DIY choice that is relatively affordable. Blown-in cellulose or cellulose fiber insulation is another option for homeowners and contractors. It offers a higher R-value than blanket insulation, but it can settle and lose effectiveness over time.

Spray foam insulation (open- or closed-cell) is a highly effective option for homeowners and professionals that provides an airtight seal. It can be installed with special equipment over attic joists and other structural elements, eliminating the need for a separate layer of drywall.

While the initial investment for attic insulation may seem high, it’s worth it in the long run. It significantly cuts your energy consumption and reduces your impact on the environment, while improving your home’s resale value. It also reduces noise infiltration, helping you enjoy a more peaceful home environment.

Synergy Spray Foam & Air Conditioning
6204 Edmund Hwy, Lexington, SC 29073
803-728-0581
…